PAINT REPAIR

 

 

Follow manufacturer's instructions for use of all chemicals in this procedure.

Remove any surface oils or contaminants via hand solvent wash using Dupont 3949S Low VOC cleaner or detergent pressure wash/rinse procedure. Use an abrasive pad to abrade the surface. Solvent clean powder coated surfaces using Acetone. Using 220 grit sandpaper, sand powder coated surface and feather the edges of the area to be painted. Use Dupont MetaLok CVP 250 S™ Pretreatment where bare metal is exposed. Let dry for 30 minutes. Apply color matched Dupont Imron 3.5 SF Satin Gloss Polyurethane topcoat system when surface temperature is above 8 degrees C (45 degrees F) and less than 44 degrees C (110 degrees F).

 

 

 

 
Acoustax Noise Barriers • 243 W. Eighth Street • PO Box 174 • Wyoming, PA 18644 • Toll Free: 800.233.9601 •  info@acoustax.com • sitemap

Noise Barrier Applications | Noise Barrier Color Options | Noise Barrier Picture Gallery | Acoustax Certified Tests | Noise Barrier Installation Guides |
Contact Acoustax | Noise Barrier Brochure | Acoustax Recommended Links | Acoustax Featured Noise Barrier Application

©2005 Acoustax Noise Barriers. All rights reserved.